Digital core power voltage set to 0.9375V Decompressing...done Digital core power voltage set to 0.9375V SHMOO VER 1.13 PKID07DC06011801080000000000001A103F01000000 S300001E7 000014A0 RDLYW0 00000004 RDENW0 00000031 RDQSW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++---- 01 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++---- 02 ----------+++++++++++++++++++++++++++X+++++++++++++++++++++++++- 03 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------ 04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++--------- 05 ---------++++++++++++++++++++++++X+++++++++++++++++++++++------- 06 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 07 ----------+++++++++++++++++++++++++X++++++++++++++++++++++++---- 08 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++----- 09 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++-- 10 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 11 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++--- 12 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++------- 13 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++-- 14 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 15 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++-- PW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 -------+++++++++++++++++++++++++++X++++++++++++++++++++++++++--- 01 ---------+++++++++++++++++++++++++++X++++++++++++++++++++++++++- 02 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 03 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------ 04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++--------- 05 --------++++++++++++++++++++++++X++++++++++++++++++++++++------- 06 -----+++++++++++++++++++++++++X++++++++++++++++++++++++--------- 07 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++---- 08 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++----- 09 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++-- 10 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 11 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++--- 12 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++------- 13 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++-- 14 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 15 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++-- NW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---- 01 -------++++++++++++++++++++++++++X+++++++++++++++++++++++++----- 02 -------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++- 03 ----+++++++++++++++++++++++++++X++++++++++++++++++++++++++------ 04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++--------- 05 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 06 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++-------- 07 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---- 08 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-- 09 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ 10 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++--- 11 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 12 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 13 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++ 14 ------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---- 15 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++ WRDQW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ++++++++++++++++++++++X++++++++++++++++++++++------------++++++- 01 +++++++++++++++++++++++++X++++++++++++++++++++++++----------+++- 02 ++++++++++++++++++++++++X++++++++++++++++++++++++----------++++- 03 +++++++++++++++++++++++X+++++++++++++++++++++++-----------+++++- 04 ++++++++++++++++++++X++++++++++++++++++++---------------+++++++- 05 +++++++++++++++++++++++X++++++++++++++++++++++-------------++++- 06 ++++++++++++++++++++++X+++++++++++++++++++++------------+++++++- 07 +++++++++++++++++++++++X++++++++++++++++++++++----------+++++++- 08 +++++++++++++++++++++++X+++++++++++++++++++++++------------++++- 09 ---++++++++++++++++++++++++X+++++++++++++++++++++++------------- 10 +++++++++++++++++++++++X+++++++++++++++++++++++-------------+++- 11 --++++++++++++++++++++++++X++++++++++++++++++++++++-----------+- 12 +++++++++++++++++++++++X+++++++++++++++++++++++-----------+++++- 13 --++++++++++++++++++++++++X++++++++++++++++++++++++------------- 14 +++++++++++++++++++++++X+++++++++++++++++++++++-------------+++- 15 +++++++++++++++++++++++++X++++++++++++++++++++++++-----------++- WRDMW0 00000022 WRDMW0 00000024 ADDR 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ++++++++++++++++++++S++++++++++X++++++++++++++++++++++++++++++++ Decompressing...done CJ++ for mspi get id 0xc8 0x17 CJ++ for mspi get id 0xc8 0x17 Found a ST compatible (Micron) serial flash with 256 64KB blocks; total size 16MB CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Sat Aug 15 04:37:51 EDT 2015 (root@AirHost) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) Can't find nandflash! ccrev = 42, chipst= 0 DDR Clock: 666 MHz Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350) CPU type 0x0: 800MHz Tot mem: 131072 KBytes CFE mem: 0x00F00000 - 0x017A81FC (9077244) Data: 0x00F5F5B0 - 0x00F60C58 (5800) BSS: 0x00F60C68 - 0x00FA61FC (284052) Heap: 0x00FA61FC - 0x017A61FC (8388608) Stack: 0x017A61FC - 0x017A81FC (8192) Text: 0x00F00000 - 0x00F53798 (341912) Boot: 0x017A9000 - 0x017E9000 Reloc: I:00000000 - D:00000000 Mac:c8-3a-35-32-ce-b0 Device eth0: hwaddr C8-3A-35-32-CE-B0, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set upgrade wait time is 3s **upgrade_wait over! Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 4114848 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550 brd: module loaded loop: module loaded pflash: found no supported devices bcmsflash: squash filesystem found at block 29 Creating 8 MTD partitions on "bcmsflash": 0x000000000000-0x000001000000 : "All" 0x000000000000-0x000000040000 : "Bootloader" 0x000000040000-0x000000fc0000 : "KernelFS" 0x0000001d8d14-0x000000fc0000 : "RootFS" 0x000000fc0000-0x000000fd0000 : "Policy" 0x000000fd0000-0x000000fe0000 : "CFM_BACKUP" 0x000000fe0000-0x000000ff0000 : "CFM" 0x000000ff0000-0x000001000000 : "nvram" nflash: found no supported devices PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1961 buckets, 7844 max) [BM CORE ] INFO: online ip data hash table created, size = 199 [BM CORE ] INFO: online_ip proc file created ctnetlink v0.93: registering with nfnetlink. create /proc/behavior/emailbcc SUCCESSFULLY. netfilter smtp init successfully xt_time: kernel timezone is -0000 Kernel:Init flow dev success. IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 L2TP IP encapsulation support (L2TPv3) L2TP netlink interface L2TP ethernet pseudowire support (L2TPv3) 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012 brcmnand: found no supported devices VFS: Mounted root (squashfs filesystem) readonly on device 31:3. devtmpfs: mounted Freeing init memory: 216K mkdir: can't create directory '/var/run': File exists _fastnat_attach: fastnat attach is successful register. fastnat_init: FastNat_init successful . [BM CORE ] INFO: bm_init success bm_debug_init_proc success! [U2K MODULE ] INFO: bm_u2k_info_init success insmod: can't read '/lib/modules/ai.ko': No such file or directory [MAC FILTER ] INFO: bm_mac_filter init success [QOS ] INFO: qos module init success OS TYPE INIT FINISHED [URL FILTER ] INFO: url filter init success Give root password for system maintenance (or type Control-D for normal startup):init_core_dump 1784: rlim_cur = 0, rlim_max = -1 init_core_dump 1793: open core dump success init_core_dump 1802: rlim_cur = -1, rlim_max = -1 func:InitCfm begin load_mib.... flash_read:ret = 65536 crc = 3e1cef29, newcrc = 3e1cef29 ######## STARTING PROGRAM ######### flash_read:ret = 65536 crc = 4e2b34d6, newcrc = 4e2b34d6 flash_read:ret = 65536 crc = 4e2b34d6, newcrc = 4e2b34d6 MTD[Policy] size is 64K read flash:uncompress len=240468; crc=0a2959c2 left wan[0]:0 right lan[3]:1 right lan[2]:2 right lan[1]:3 right lan[0]:4 vlan_array[0]: value 1 index_num 1 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[1]: value 0 index_num 4 index[0] 1 index[1] 2 index[2] 3 index[3] 4 index[4] 0 vlan_array[2]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[3]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[4]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 nvram unset vlan1ports nvram unset vlan2ports nvram unset vlan3ports nvram unset vlan4ports nvram unset vlan5ports nvram set vlan2ports="0 5" nvram set vlan1ports="1 2 3 4 5*" #IPTV STB VLAN ID mode is disable!# main=>100:init server success.1.. No need to start gpio thread. et: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint et_module_init: passivemode set to 0x0 et_module_init: txworkq set to 0x1 et_module_init: et_txq_thresh set to 0x0 stbport=4= eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350) wl_module_init: passivemode set to 0x0 wl_module_init: txworkq set to 0x1 srom rev:0 --td_phy_status_init-- eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) srom rev:0 --td_phy_status_init-- eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000 ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/class/usblp.ko': No such file or directory xhci_hcd 0000:00:0c.0: xHCI Host Controller xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:00:0c.0: irq 112, io mem 0x18023000 xhci_hcd 0000:00:0c.0: Failed to enable MSI-X xhci_hcd 0000:00:0c.0: failed to allocate MSI entry usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected Hello,This is the USB LED handling Driver >>si_gpioreserve : 0xffffffff >>si_gpiocontrol : 0x0 >>si_gpioouten : 0x4645 >>si_gpioout : 0x4601 ufsd:: trace mask set to 0000000f ufsd: driver (lke_9.2.0 lke_9.2.0_r247506_b7, build_host("fsd-bs-cluster03"), LBD=OFF, acl, ioctl, bdi, sd2(0), wb, bz, tr) loaded at bf6d1000 NTFS support included optimized: speed Build_for__Tenda_AC7_k2.6.36_2015-04-07_lke_9.2.0_r247506_b7 'Evaluation version - not for resale!' ifconfig: SIOCSIFHWADDR: No such device ifconfig: SIOCGIFFLAGS: No such device ### set br0 mac [c8:3a:35:32:ce:b0]### [5] ##############add vlan devices [vconfig add eth0 2] ##############add vlan devices [vconfig add eth0 1] device eth0 entered promiscuous mode ifconfig: SIOCSIFHWADDR: No such device device eth0.1 entered promiscuous mode br0: topology change detected, propagating br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state IPv4 FIB: Using LC-trie version 0.409 Sun May 1 00:00:00 UTC 2011 Loading dnrd... killall: dnrd: no process killed _eval 98: child process create success _eval 98: child process create success _start_time_check 202: time_check register success, register_pid = 509 _eval 94: child process status is 0 _start_httpd 219: httpd register success, register_pid = 510 httpd _eval 94: child process status is 0 _start_multiwan 259: _start_multiwan register success, register_pid = 511 _eval 94: child process status is 0 _start_ucloud 288: ucloud register success, register_pid = 512 ucloud multiWAN time_check netctrl init_core_dump 1784: rlim_cur = -1, rlim_max = -1 init_core_dump 1793: open core dump success [TIMER_CHECK >>time_check_reboot_info_printf(51)]: enable:1 [TIMER_CHECK >>time_check_reboot_info_printf(52)]: type:1 [TIMER_CHECK >>time_check_reboot_info_printf(57)]: wday_en:1;1;1;1;1;1;1 [TIMER_CHECK >>time_check_reboot_info_printf(58)]: start_time:03:00 [TIMER_CHECK >>time_check_reboot_info_printf(59)]: end_time:05:00 [TIMER_CHECK >>time_check_reboot_info_printf(60)]: max_speed:3 [TIMER_CHECK >>time_check_reboot_info_printf(61)]: check_speed=3000 [TIMER_CHECK >>time_check_reboot_info_printf(62)]: wan_ifnames:eth0.2 [TIMER_CHECK >>time_check_power_info_printf(48)]: enable:0 [TIMER_CHECK >>time_check_power_info_printf(49)]: type:1 [TIMER_CHECK >>time_check_power_info_printf(54)]: wday_en:1;1;1;1;1;1;1 [TIMER_CHECK >>time_check_power_info_printf(55)]: start_time:00:00 [TIMER_CHECK >>time_check_power_info_printf(56)]: end_time:07:00 [TIMER_CHECK >>time_check_power_info_printf(57)]: max_speed:3 [TIMER_CHECK >>time_check_power_info_printf(58)]: check_speed=3000 init_core_dump 1802: rlim_cur = -1, rlim_max = -1 init_core_dump 1784: rlim_cur = -1, rlim_max = -1 init_core_dump 1793: open core dump success init_core_dump 1802: rlim_cur = -1, rlim_max = -1 Yes: ****** WeLoveLinux****** Welcome to ... init_core_dump 1784: rlim_cur = -1, rlim_max = -1 init_core_dump 1793: open core dump success init_core_dump 1802: rlim_cur = -1, rlim_max = -1 old - soft: -1, hard: -1 old - soft: 4096000, hard: -1 not need to write flash,crc:[7abe1867] commit cfm failed or not need write flash logserver.c check network 192.168.0.1 success [httpd][debug]----------------------------webs.c,157 httpd listen ip = 192.168.0.1 port = 80 webs: Listening for HTTP requests at address 192.168.0.1 RTNETLINK answers: Operation not supported sh: can't create /proc/br0_ip: nonexistent directory max_new_conntrack=4000 sh: nkgw: not found Debug->tpi_port.c: tpi_port_handle(61)--type = 0 Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1 Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0 Notice: caching turned off set port 0 to AUTO ######## RECEIVING DATA ######### [ DEBUG ] ******Sucessed to change lan config! ****** iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: Index of insertion too big. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. killall: 3322ip: no process killed killall: 88ip: no process killed killall: gnway: no process killed killall: phddns: no process killed killall: inadyn: no process killed rm: can't remove '/etc/ddns_*': No such file or directory iptables: No chain/target/match by that name. nbns task start: arp task satrt: iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri= RTNETLINK answers: No such file or directory dhcpsCfgToStruct 479: lan type is dhcps_lan_dhcpc_configure 251: lan dhcp client not get ip [QOS ] INFO: g_qos_enable = disable Init gsbmac dev success. The ARP attack defence is init v1 successful killall: arpbrocast: no process killed Kernel:Init attack fence dev success. the ddos ip attack defnence init successful iptables v1.4.12.2: Couldn't load target `icmp_drop':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. Error: argument "xmain" is wrong: invalid table ID Error: argument "xmain" is wrong: invalid table ID RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory iptables v1.4.12.2: Couldn't load target `access_ctrl':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. SET_LAN_PARAM_DATA k_data: lan ip:3232235521 lan mask:4294967040 lan submask:3232235520 lan interface:br0 lan http port:80 icmset the proceee ture p iSET_IPOP_FENCE_ATTACK_DATA k_data: s 1 ip options:32512 ,15SET_BAD_PKT_FENCE_ATTACK_DATA k_data: 00 bad pkt:248 ,udSET_DDOS_FENCE_ATTACK_DATA k_data: p i status:7 s 1 tcp threshold:1500 ,1 udp threshold:1500 500 icmp threshold:1500 ,tcp_syn is 1,1500 ---------->>[ start_wifi, wl_rate=24 ] 30562042 [ ERROR ] invalid access mode: killall: wps_monitor: no process killed killall: nas: no process killed killall: eapd: no process killed [ DEBUG ] len=6,lan1_ifnames = wl1.1 br1: No such device iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_input':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_forward':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. [ ERROR ] Guest dhcp server is disable,do nothing! killall: acsd: no process killed mdns task start: eth1: cmd=231: Invalid argument eth1: WLC_SET_VAR(chanspec): Invalid argument eth1: Wmaxrssi=-100,int_val=-100 LC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operatset tenda auto width obss_coex:1 ion not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation ndevice eth1 entered promiscuous mode ot supbr0: topology change detected, propagating porbr0: port 2(eth1) entering forwarding state tedbr0: port 2(eth1) entering forwarding state eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth1: cmd=64: Operation not supported eth2: WLC_GET_VAR(psta_if): Invalid argument [ DEBUG ] len=6,lan1_ifnames = wl1.1 iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_input':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_forward':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. [ ERROR ] guest dhcp server disable or tpi_wl_guest_dhcps_saveConfig returns error ,ret=0 acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x100a eth2: WLC_GET_VAR(bw_cap): Invalid argument ACSD >>acs_get_rs_info(1209): failed to get bw_capret code: -1 wisp or APC is close [ Message ]------msgsnd--------[ ucloud ][ 721621, 65538 ] [ Message ]------msgsnd--------[ ucloud, 1 ] ---------->>[ start_wifi, wl_rate=5 ] [ Message ]------msgrcv--------[ ucloud ][ 721621 / 65538 ] [ Message ]------msghdl--------[ ucloud / 1 ] 30562042 [ ERROR ] invalid access mode: [ ERROR ] coutry_code=US [ DEBUG ] len=6,lan1_ifnames = wl1.1 iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_input':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `guest_access_forward':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. [ ERROR ] Guest dhcp server is disable,do nothing! eth2: cmd=231: Invalid argument eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Opemaxrssi=-100,int_val=-100 ration not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supporset tenda auto width obss_coex:0 ted eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supporteddevice eth2 entered promiscuous mode ethbr0: topology change detected, propagating 2: br0: port 3(eth2) entering forwarding state WLCbr0: port 3(eth2) entering forwarding state _SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth2: cmd=64: Operation not supported device br1 already exists; can't create bridge with the same name [ DEBUG ] len=1,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... ###fd failed to recv packet!### ##### NO SERVER FOUND! ##### acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1805 wisp or APC is close [ Message ]------msgsnd--------[ ucloud ][ 721621, 65538 ] [ Message ]------msgsnd--------[ ucloud, 1 ] msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start] [ Message ]------msgrcv--------[ ucloud ][ 721621 / 65538 ] [ Message ]------msghdl--------[ ucloud / 1 ] [ Message ]------msgsnd--------[ time_check ][ 721602, 32769 ] [ Message ]------msgsnd--------[ time_check, 4?relate_module_id=19,string_info=first_time_start ] [ Message ]------msgrcv--------[ time_check ][ 721602 / 32769 ] [ Message ]------msghdl--------[ time_check / 4?relate_module_id=19,string_info=first_time_start ] [TIMER_CHECK >>TimeCheckMsgHandle(163)]:msg:4?relate_module_id=19,string_info=first_time_start [TIMER_CHECK >>init_time_check_module_var(146)]:key = relate_module_id,value = 19 [TIMER_CHECK >>init_time_check_module_var(154)]:key = string_info,value = first_time_start tpi_sntp_handle(44): start sntp... tpi_set_user_policy,35: entry count:0 systime_server = 211.138.200.208 main,334,sntp_en =1,tz=20.00,checktime=86400 [ DEBUG[MAC FILTER ] INFO: g_mac_filter_enable = disable, mf_default_action = accept ] RL FILTER ] INFO: g_uf_enable = disable [mlan dhcp[MAC FILTER ] INFO: g_mac_filter_enable = disable, mf_default_action = accept not [URL FILTER ] INFO: g_uf_enable = disable enable Open /tmp/UDiskname is FailDisk:the file was locked. Writesamba.config.bak OK! Disk:/tmp/samba/lib/samba.config.bak the file was unlocked. ******* unlink /tmp/smbpasswd is fail startsmbfilepwent_internal: file /tmp/samba/private/smbpasswd did not exist. File successfully created. account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0 Added user admin.